Sheetrock is brittle, weak, and simply crumbles… so why is it so widely used for house interiors? Plus, mesh creates a stronger bond between the old and present drywall items. Then minimize out the section with a drywall noticed or utility knife. Measure and minimize a small rectangular section of plasterboard to suit the opening snugly and repair it to the battens with drywall screws.
Remove as much drywall as needed until you attain studs past both sides of the broken space. After applying joint compound, use mesh tape versus drywall tape to cowl the seams. Cover the patch and tape with joint compound, feathering the perimeters. A standard drywall downside, particularly in newer homes, is nail pops,” or nail heads that draw back from the wooden studs and protrude through the drywall tape or paint.
Next, use a pointy utility knife to rigorously cut away the mesh that is overlaying the front of the electrical box (step 2). Use a 6-inch-wide drywall knife to spread joint compound over the complete patch (step 3). Don’t be concerned if a number of the compound oozes into the electrical box; it should break off simply once it has dried.
Use an digital stud finder to mark the studs behind the broken drywall, then use a drywall saw or reciprocating noticed to chop away the drywall. After marrying the new and previous studs, measure the hole and reduce a corresponding piece of drywall. If the tape is undamaged and nicely-adhered, the crack was most likely caused by the old drywall compound drying and shrinking.
A much better possibility is to cover your entire space — including the electrical box — with a FibaTape Outlet Repair Patch ($2) from PermaGlas-Mesh. A popped nail is not holding within the stud and backs out of the drywall, creating a popped nail head. Test your blueprints to make sure there are no electrical wires running behind the realm being reduce.