To repair and area of drywall that has been damaged you have to sheet rock, a utility knife, fast dry-low mud joint compound, mesh tape for drywall, one inch galvanized drywall screws, a drill, drywall knife and a drywall sanding block. Or make a shallow reduce by repeatedly scoring the road with a pointy utility knife. When the second coat is thoroughly dry, sand lightly to clean out any bumps. It comes with all the required provides to make the repair, except the brand new drywall itself. Lower along the lines on the wall with a drywall knife.
A significantly better option is to cover your entire area — together with the electrical box — with a FibaTape Outlet Restore Patch ($2) from PermaGlas-Mesh. A popped nail isn’t holding in the stud and backs out of the drywall, creating a popped nail head. Examine your blueprints to verify there aren’t any electrical wires operating behind the realm being reduce.
In case your damaged piece is on a nook wall, attempt to protect the drywall protecting the corner stud. The place a number of screws are placed in a row, spot-patch each with compound and canopy them with a strip of fiberglass tape as described within the steps above (picture three).
In listed buildings repairs to old lath and plaster partitions should be made with a lime plaster. Scrape away any unfastened compound, and use a razor knife or drywall noticed to increase the crack by way of the wall surface into the stud cavity (image three). Avoid removing solid, nicely-adhered compound beyond the crack itself.
Safe the patch by driving two 1/4-inch drywall screws by every metal clip — one screw by means of the encompassing wall and one other by way of the patch (step three). Ensure the screwheads are set barely below the floor without breaking the paper. When putting in new electrical retailers and wall switches, it is easy to chop the holes for the electrical bins a bit too massive.